9/32 inch (7mm) VC315 Procraft V-bar Singles with Cams
These chains are V-bar reinforced and intended for use in snow, ice, and mud. V-bar Tire Chains also come equipped with Cams for easy tensioning of chains. Made to Canadian specifications, these chains do not conform to an SAE class as they are overbuilt, and components used are all oversized. Ensure vehicle has sufficient clearance to use these chains.
Second only to Studded chains for height profile off the tire, ride is rough, but the V-bars on these chains dig in and grip the ice where cables and other less agressive chains get bogged down and spin.
Typical uses would be for 4x4 for hunting & fishing. Industrial applications would be for tow trucks, road clearing, forestry road access, and for off-road oil-field access.
This item fits the following tires:
7.00-15, 7.50-15, 9.00-15, 31x9.5-15, 31x10.5-15, 32x9.5-15, 255/70-15, 265/70-15, 265/75-15, 275/60-15
7.50-16, 215/85-16, 225/75-16, 225/85-16, 235/70-16, 245/75-16, 255/65-16, 255/75-16
8.75-16.5, 9.50-16.5, 30x9.5-16.5, 31X10.50-16.5
225/75-17, 235/60-17, 235/70-17, 235/80-17, 245/60-17, 255/55-17, 255/60-17, 255/65-17, 265/55-17, 265/65-17
7-17.5, 8-17.5, 10-17.5, 205/75-17.5, 215/70-17.5, 215/75-17.5, 225/70-17.5
225/65-18, 255/55-18
These chains are fitted with 3 cams per tire for easier tensioning of chains. Simply install chain tight with cams in extended position, then close the cams as necessary to take up any residual slack. It is not neccessary to close all the cams. Just close cams to fit chains snuggly, but not so tight that chains exert pressure on the tire itself.
Cam in Open Position Insert Cam T-wrench Turn Clockwise to Close Cam in Closed Position
!!! Due to variations in tire manufactures, and the geometry of the suspensions in many cars - it is imperative that you find out that there is enough clearance for chains to be used. It is also important to install chains prior to actual use and examine for proper fit. If using on front wheel drives it is neccessary to turn wheels all the way to the left, and right to make sure chains will clear all components, and body work when car is in motion. !!!
